Dr. Satya N. Mandal FRICS Professor, School of Construction RICS SBE, Noida School of Construction Contact Details: firstname.lastname@example.org Dr. Satya N. Mandal FRICS Professor, School of Construction RICS SBE, Noida School of Construction Contact Details: email@example.com Overview Satya Mandal is a Professor, School of Construction at RICS School of Built Environment, Amity University, Noida. He has a work experience of over 40 years, comprising of 34 years in NTPC / JPVL / Power Sector after an initial experience of about 6 ½ years in research, teaching and civil design & construction work. Prof. Satya Mandal is a Fellow of the Royal Institution of Chartered Surveyors. He worked at JVPL from February 2011 to January 2015 as Senior Vice President (Civil). During his work tenure at JPVL he was entrusted with the responsibility of civil, structural and foundation design &engineering work for the super critical thermal power projects at Nigrie and Bara and construction quality of civil works for transmission lines associated with Nigrie . He was instrumental in saving the construction time, cost with enhanced quality of work by being a part of several problem solving exercises through value engineering and adoption of innovative construction / rectification techniques. Besides his job resposnsibilities he was entrusted with the task of skill building in the area of quality for civil works for the power projects under construction. During his tenure of Over 30 years at NTPC Ltd., largest Indian power generating company, he worked in areas of thermal power project, combined cycle gas base power project, hydroelectric power projects, as well as transmission lines and switchyard projects. The nature of work included planning, investigation & studies, design, pre-award and post-award engineering, preparation of DPR and Feasibility studies including hydrological and hydraulic routing studies, area drainage and flood mitigation studies using remote sensing data. He was responsible for development and implementation of quality assurance and quality control system in thermal and hydro power projects including quality audit, assessment and approval of sub-vendors / sub-contractors for various thermal and hydroelectric projects of NTPC. He worked as the head of the foundation group, Civil Quality Assurance and transmission line consultancy groups, dealing with clients like Dubai Electricity & Water Authority (DEWA), Kennedy & Donkin UK, EDF Energy France, BSES, DESU, MSEB and WBSEB and is credited with solutions of several critical problems related to pile foundations, machine foundations, flood mitigation, earth & rock fill for large dams and structural distresses, uneven settlement under large diameter DM Water tanks, seepage in CW pit and CEP pit and slope protection for wagon tippler and raw water reservoir associated with power plants. He was associated with several system improvement exercises at NTPC, most notable being the one during his tenure of heading the quality assurance group. He is one of the few professionals who continued their association with the academia during work tenure with industry, by being a trainer at the Power Management Institute, the apex training and development institute of NTPC, designing, planning and supervising the training programs for the new entrants and the professionals working at sites, besides conducting several workshops for capability enhancement. He designed and compiled a Handbook on Quality Assurance for Civil Works aimed to educate / facilitate the site engineers, train young entrants and to create an all pervasive quality culture in civil works. He was designated as Champion of Knowledge Management initiatives at NTPC for building of technical and tactical knowledge bank based on his tacit knowledge for future reference of NTPC professionals. He worked closely with several institutions of repute like IITs, NCBM, CBIP, NIRM, CSMRS, CMRI, ISM Dhanbad for several problem solution exercises. He facilitated research projects and was invited as an external evaluator / examiner for a few of the PhD and M.Tech. projects from IITD & SPA, New Delhi. Owing to his expertise he is a serving member of the BIS sub-committee CED 29 / P1 responsible for formulation of IS 15883 Part 1 to 12 on Guidelines for Construction Project Management. Education BE (CIVIL ENGG.) from BIT SINDRI, RANCHI UNIVERSITY, INDIA. Ph D (STRUCTURAL ENGG.), UNIVERSITY OF NOTTINGHAM, ENGLAND, (UK). Experience Construction Project Management Construction Project Planning and Control Value Engineering Construction Management Construction Quality Management Building materials Procurement and tendering Design Management and pre-construction planning Quality Health Safety and Environment Construction Materials, Methods and technology Construction methods equipment and Technology Procurement and tendering Construction Quality and Safety Management Theory Of structures Research Research Projects: “The Collapse Behaviour of Tapered Steel Pate Girders”, Proceedings of International Association of Bridge and Structural Engineers Symposium held in Moscow on 7-8 September, 1978. “Tapered Steel Beams Loaded within Tip”, journal of the Structural Division Proceedings of American Society of Civil Engineers, Vol. 105, No.ST3 March, 1979. “The Collapse Behaviour of Tapered Plate Girders Loaded within the Tip”, Proceedings of the Institution of Civil Engineers, London, Part-II, Vol.57 March, 1979. “The Collapse Behaviour of Tapered Steel Beams”, May 1978, Ph.D. Thesis, Department of Civil Engineering, University of Nottingham, U.K. “The collapse behavior of Tapered Plate Girder Web subjected to combined shear and bending”- October’1978.Research report submitted to department of Surface Transport London. “Probabilistic Approach for Design of Transmission Lines”, presented at Proceedings of the National Seminar on Latest Trends in Design of Transmission Line Structures organized by CBI&P, New Delhi, 16 July, 1993. “Multi-circuit / Special Transmission Line Towers – Planning and Evaluation of Design Parameters”, Proceeding of the National Workshop on Transmission Line Tower Design, Manufacturer, Erection, Maintenance and Testing Organized by CBI & P, on 29th November – 02 December 1994, at Vadodra. “Design and Construction criteria for Up rating of HVAC Transmission lines”, Proceedings of the International Seminar on Up rating / Up gradation of Transmission Lines, New Delhi, 23-24 March 1995. Others Member of the BIS sub-committee CED 29 / P1 responsible for formulation of IS 15883 part 1 to 12 on Guidelines for Construction Project Management covering Time management, Cost Management, Quality Management, Health & Safety Management, Scope Management, Procurement Management, Communication Management, Human Resource Management, Sustainability Management and Integration Management International Editorial Board of the Journal of Civil Engineering and Environmental Systems (January 2003 to present). Fellow -The Institution of Engineer India. Fellow- International Association of Bridge and Structural Engineering (IABSE), Zurich, Switzerland. Member- International Council on Large Electric Systems (CIGRE’), France. Member- International Commission on Large Dams (INCOLD), Sweden. Represented NTPC on various Panels of Experts of CBI&P and BIS associated with formulation of codes and standards.